Long time liner/zirconia ceramic liner for drilling mud pump

Zirconia ceramic liner for drilling mud pump 1.Material: Ceramic and steel 2.Used for mud pump fluid end 3.Long time liner

Long time liner/zirconia ceramic liner for drilling mud pump

Ceramic Liners have better performance than metal liners in wear-proof,corrosion resistant and service life. Ceramic liners have reduced the drilling cost and improved the labour intensity in locale. So ceramic liners are the frist choice of upgrade high-voltage mud pump liners.

 

 

The material of ceramic liner is the most advanced international increased flexible zirconium.

The flexiable technical number is K10--15MPa (10 times of traditional ceramic)

number of resist- bending strengh is σ600--800Mpa

Weber number is m18.

The specification size is Φ150 (mix)180(max) X 310(mix)440(max)mm.

 

 

The following safety guidelines should be noted before installation:

1.When installing the cylinder, it is better to use the special tool or follow the instruction below;

 

2.Strictly prohibit flinging knocking or impacting the cylinder, if you need to put down, you should move it as slowly and careful as you can;

 

3.Strictly prohibit hitting ceramic cylinder with hammer or other heavy objects (including the metal shuck of the cylinder). When hitting, wood or other materials should be used as buffer cushion;

 

4.When you use hammer or other heavy objects to hit or strike the cylinder (especially for pressure cap, piston crown, piston rod), you should control the appreciated angle and force. Otherwise, the impact force which has been transferred to the cylinder will possible fracture the ceramic liner of cylinder;

 

5.Before the installation of piston, you should check whether there is any damage on the metal shuck of piston crown. There should be at least 0.20mm installation clearance between the maximum outer diameter of the piston and inner diameter of ceramic liner, otherwise, ceramic liner could possible be damaged;

 

6.After the installation, the side-friction between the metal part of piston and ceramic wall of the cylinder should be avoided. If it does happen, you should rectify as quickly as you can;

 

7.If the cylinder is ceased to use for a long time (time length should be decided by the local freezing speed) under 0 centi degree in the winter, the mud in the ceramic liner should be let out in order to prevent the freezing and swelled mud press ceramic liner of the cylinder.

 

EMSCO
F-350	F-500	F-650	F-800
F-1000	FB-1300	FB-1600
Gardner Denver
PAH	TEE	PZ-7	PZ-8
PZ-9	PZ-10	PZ-11
IDECO
T-500	T-800	T-1000	T-1300
T-1600
National
7-P-50	8-P-80	9-P-100	10-P-130
12-P-160	JWS165L
Oilwell
A-350	A-560	A-600	A-850
A-1100	A-1400	A-1700
Others
350-D	350-DG	500-DC	700-HDL
1000-HDL	MAS1000

 

 

 

Long time liner/zirconia ceramic liner for drilling mud pump